Important: This article is general information for education only. It does not recommend any lender or loan product, and it is not financial advice. Rates, fees and policies differ between lenders and change often, so check the current terms in writing before you act.


Many IT professionals took home loans during the low-rate years, often in a hurry: an offer letter from a GCC, a flat near the tech park, a builder-tied lender at the sales office. Years later the EMI has crept up, the tenure has stretched, and a colleague who borrowed last month mentions a rate noticeably lower than yours. After the Reserve Bank of India raised the repo rate to 5.50% on 7 October 2026 (we covered that in what the repo hike means for your EMI), every floating-rate borrower is paying more. But not every borrower is paying the same more.

This guide explains why two people with similar profiles can be on very different rates, how to ask your own lender for a reset, when moving the loan to another lender (a balance transfer) is worth the effort, and how to work out the break-even point honestly, including every fee.

Why your rate may be higher than a new borrower’s

Most floating-rate home loans from banks today are linked to an external benchmark, usually the repo rate. Your rate is the benchmark plus a spread. The spread is made up of the lender’s operating cost and a credit risk premium that reflects how risky the lender judged you to be when the loan was sanctioned.

When the repo rate moves, your rate moves with it at the next reset date. Your spread, however, generally stays where it was fixed. RBI’s rules say the credit risk premium should not be raised unless your credit assessment changes substantially, and that other spread components are normally held for a period. So if you borrowed when lenders were charging a wide spread, or your credit score was thin as a fresher, you may still be carrying that spread long after your profile improved. Meanwhile, a new customer with a strong score may be offered a much narrower spread on the same benchmark.

A second group is stuck on older internal benchmarks such as MCLR or base rate. These reset less often and transmit rate changes slowly in both directions. If your sanction letter mentions MCLR, base rate or a lender’s own prime lending rate, it is worth comparing your effective rate with what an external-benchmark loan would cost today.

What RBI rules give you as a borrower

A few regulatory points matter directly for this decision. Check the current text on rbi.org.in, because the Reserve Bank consolidated many instructions into new Directions in 2025 and has amended them since.

  • No pre-payment or foreclosure charges on floating-rate loans to individuals for non-business purposes. RBI’s Pre-payment Charges on Loans Directions, 2025 apply to loans sanctioned or renewed on or after 1 January 2026, and make clear the rule applies whatever the source of the money, including a takeover by another lender. Older floating-rate home loans to individuals were already covered by earlier RBI instructions barring foreclosure charges. Your loan agreement and Key Facts Statement should state the position.
  • Information at reset. Under RBI’s framework on resetting floating rates on EMI-based personal loans, lenders must tell you when the rate changes, explain the effect on EMI or tenure, and send a quarterly statement showing principal and interest recovered, EMI, instalments left and the annualised rate.
  • Option to choose EMI or tenure change, and to prepay. The same framework requires lenders to offer the choice of raising EMI or extending tenure (or a mix), and to allow pre-payment in part or full at any point, subject to the pre-payment charge rules above.
  • Switch to a fixed rate at reset. After RBI’s September 2025 amendment, offering a switch to a fixed rate at reset is a matter for each lender’s Board-approved policy rather than a universal obligation. Any switching charges must be disclosed upfront.
  • Spread reductions. The same amendment allows lenders to reduce spread components for existing borrowers earlier than before, on non-discriminatory grounds. That is the regulatory basis for asking your lender to bring your spread closer to what new customers get.

Option 1: a rate reset with your own lender

Most lenders have a “conversion” or “switch” facility for existing customers who want a lower spread, or who want to move from an old benchmark to the current external benchmark. You usually apply through the branch, the lender’s app or the loan servicing team. The lender may charge a conversion fee, often a fixed amount or a small percentage of the outstanding principal, plus GST.

The advantages are clear: no new property paperwork, no fresh mortgage registration, no valuation visit, and the switch can take days rather than weeks. The drawback is that your own lender may offer only part of the reduction a competitor would give, knowing that most borrowers do not bother to move.

Option 2: a balance transfer to another lender

In a balance transfer, a new lender pays off your outstanding principal, collects your original property documents from the old lender and creates a fresh mortgage in its own favour. You then pay EMIs to the new lender. Many lenders also offer a “top-up” loan at the same time, which is tempting but should be judged separately.

A transfer means a complete fresh credit appraisal: salary slips, Form 16, bank statements, your credit report, and a property and legal check. If you have recently moved jobs, are on a notice period, are serving a probation period, or have a large share of pay in variable pay or RSUs, the new lender may price you differently or decline. Timing matters: a transfer is usually smoother once you are confirmed in a role and have a few months of salary credits from the new employer.

Reset vs transfer at a glance

FactorRate reset with own lenderBalance transfer
Typical rate gainPartial; depends on lender’s retention policyOften larger, if your profile is strong
Main costsConversion fee plus GSTProcessing fee plus GST, legal and valuation fees, mortgage registration or stamp duty (state-specific)
PaperworkRequest form, sometimes a supplementary agreementFull application, income proof, property documents, new mortgage
Time takenDays to a couple of weeksSeveral weeks
Credit enquiryUsually none or minimalHard enquiry on your credit report
RiskLowRejection or lower-than-advertised offer after appraisal; spread may differ from the headline
Pre-payment charges on old loanNot applicableNot permitted on floating-rate loans to individuals for non-business use

Worked example: Karthik’s ₹62 lakh loan

Karthik Raman, a senior QA engineer in Pune, has ₹62,00,000 outstanding with 204 months (17 years) left. After the October reset his rate is 9.35%, because his spread was fixed when he borrowed as a junior with a modest credit history. His EMI is about ₹60,787. The figures below are illustrative; they are not the rates of any particular lender.

  • Offer A, own lender: reset to 8.85% for a conversion fee of ₹15,000 plus 18% GST = ₹17,700.
  • Offer B, new lender: 8.60%. Costs: processing fee of 0.5% (₹31,000) plus GST (₹5,580) = ₹36,580; legal and valuation ₹12,000; mortgage registration and related charges in his state, say ₹18,000. Total ₹66,580.
Scenario (same 204-month tenure)RateEMIMonthly savingSwitching costBreak-evenTotal interest over tenure
Stay as is9.35%₹60,787–––≈ ₹62.0 lakh
A: reset with own lender8.85%₹58,875₹1,912₹17,700≈ 9–10 months≈ ₹58.1 lakh
B: balance transfer8.60%₹57,930₹2,857₹66,580≈ 23–24 months≈ ₹56.2 lakh

Break-even is simply switching cost divided by monthly saving: ₹17,700 ÷ ₹1,912 ≈ 9.3 months for A, and ₹66,580 ÷ ₹2,857 ≈ 23.3 months for B. Over the full tenure, B saves about ₹5.8 lakh in interest against staying put, compared with about ₹3.9 lakh for A, so B is ahead by roughly ₹1.9 lakh before costs and ₹1.4 lakh after the extra ₹48,880 of fees.

If Karthik instead keeps paying ₹60,787 and lets the tenure shrink, the gap widens. At 8.85% the loan closes in about 190 months (roughly 14 months earlier) and total interest falls to about ₹53.4 lakh. At 8.60% it closes in about 184 months (roughly 20 months earlier) with total interest of about ₹49.8 lakh. That is a saving of around ₹12.2 lakh versus staying at 9.35%, before costs.

What could change the answer? If Karthik expects to prepay most of the loan from an RSU vest within two years, the larger transfer cost may never be recovered, and the quick reset wins. If he plans to hold the loan for a decade, the transfer’s lower rate matters more. And if his own lender, once shown the competing offer in writing, matches 8.60% for a conversion fee, he gets the best of both.

Costs people forget to count

  • GST on processing, conversion and legal fees.
  • Mortgage registration or stamp duty on the new mortgage, which varies by state and by whether the mortgage is by deposit of title deeds or registered.
  • Bundled insurance. Some lenders push a loan-linked life or property policy at transfer. These are optional unless your loan terms genuinely require property insurance; check what you already hold.
  • Interest for the gap days between the old loan’s closure and the new loan’s first EMI (broken-period interest).
  • Your time: branch visits, document collection, and possibly time off work to sign the new mortgage.

Step-by-step: how to approach the switch

  1. Download your latest loan statement and find the outstanding principal, current rate, benchmark name, spread and remaining tenure.
  2. Check your credit report and score so you know how lenders will see you today.
  3. Ask your current lender in writing what conversion options exist, the new spread and rate, and the total fee including GST.
  4. Get written offers (sanction letters or Key Facts Statements) from one or two other lenders, showing benchmark, spread, processing fee, and any other charges.
  5. Calculate break-even for each option, and the total interest saved over the period you realistically expect to keep the loan.
  6. Show the best outside offer to your current lender and ask whether it will match.
  7. If transferring, obtain a foreclosure letter from the old lender, ensure the new lender pays it directly, and track the return of every original property document with a written list.
  8. After closure, collect the no-dues certificate, confirm the old charge is released (and CERSAI entry satisfied), and check your credit report a few weeks later shows the old loan as closed.

Common mistakes

  • Comparing headline rates instead of spreads. A teaser rate can be followed by a wider spread later. Ask what the spread is and whether it is fixed for the life of the loan or a set period.
  • Taking the top-up without a plan. A top-up adds debt; judge it as a new loan with its own purpose and cost.
  • Switching during a job change. A transfer application in your notice period or probation can lead to a worse offer or rejection, plus a hard enquiry on your credit report.
  • Letting tenure silently extend. After a repo hike, many lenders extend tenure rather than raise EMI. Check your statement; if the tenure has ballooned, ask for an EMI increase or prepay instead.
  • Ignoring tax effects. If you claim home loan interest under the old regime, a lower rate reduces that deduction. The net saving is still real, but smaller. Our guide on prepaying versus investing covers how to think about this.

When staying put is the better choice

Not every gap is worth chasing. If the rate difference is small (say under a quarter of a percentage point), the outstanding balance is low, or fewer than five years remain, the fees and effort may outweigh the benefit. The same applies if you are planning a large prepayment soon, if you expect to sell the flat, or if your income documentation is complicated right now, for example during onsite deputation with salary paid abroad. In those cases a simple conversation with your own lender, or a modest prepayment, may achieve more.

Frequently asked questions

Can my lender charge a penalty if I move my floating-rate home loan elsewhere?
RBI rules bar pre-payment or foreclosure charges on floating-rate loans taken by individuals for non-business purposes, whatever the source of the funds, including a takeover by another lender. Check your sanction letter and Key Facts Statement, and raise a complaint if such a charge appears.

Will a balance transfer hurt my credit score?
The new lender’s hard enquiry may cause a small, temporary dip. Closing the old loan and opening a new one is normal and is not a negative mark in itself, provided every EMI is paid on time during the changeover.

Should I reduce EMI or tenure after a lower rate?
Keeping the EMI and shortening the tenure saves far more interest, as the worked example shows. Lowering the EMI makes sense if your monthly cash flow is tight, for example after a layoff or during a career break.

Sources


Last reviewed: 1 November 2026. This article is general information, not financial advice, and does not recommend any lender or loan product. Confirm current rates, fees and terms with lenders before deciding.

Leave a Reply

Trending